A snatch block is an excellent aid to winching operations. It can increase load pulling capacity, facilitate the pull’s change in directions, and improve life expectancy of the rope and pull by lowering the strain applied on them. You should also note that utilizing one snatch block can allow you to double the rope. This in turn doubles the pulling or lifting capacity of the snatch block and the winch arrangement.

This is the reason why it’s a good idea to get a winch block from Lakeside Hire. The good news is that they have several winch blocks that you can hire depending on the type of work you have. This article is a guide to help you to use a snatch block.

A snatch block explained

A snatch block is simply a pulley system that has a metal case covering it. Snatch blockers are usually utilized as a pulley point in car-based winch recoveries designed to redirect the direction of a winch line or even to reduce the load exerted on the winch. A snatch block is designed and manufactured with a high working load limit so that it can effectively deal with the heavy loads that winch recoveries may put on your recovery gear.

Therefore, you can use a snatch block in winch recoveries rather than a standard straight-line pull that may fail to overcome an obstacle or recover a stuck car. For example, if the anchor point is offset to one side, it’s necessary to redirect the winch line so that you can access. In such cases, you need a winch as they are great in straight lines. By utilizing a snatch block, you can have the right power. A winch line redirects may be used in a variety of situations, such as obstacle avoidance and tactical track management.

A Snatch Explained

It’s worth mentioning that double-line and triple-line pulls utilize snatch block to have a mechanical advantage that lowers the load the winch endures during recoveries. For instance, by using a double-line pull, you tend to get the winch line to a snatch block attached to the anchor. You then get the winch line back to the recovery point on your car.

When you do this, you are dividing the recovery, the winch and the recovery point. This means that you halve the load your winch is facing during the active winching. In other words, when you halve the load on your winch, you can double its capacity.

Take note that a snatch block doesn’t double the power of the winch. When you use a snatch block, you don’t increase a winch’s power. Instead, you lower the load exerted on it. After all, winching capacity and winching power are not the same things.

In conclusion, you can use a snatch block in various applications. Before you decide to hire a snatch block, you should make sure that it meets the needs of your job. Also, ensure that the snatch block is suitable to handle the load.